Sliding holders

This is a slider that can add single axis, double axis or triple axis sliding functionality to a lens optical system. Its dovetail guide system and rack and pinion mechanism enable smooth movement, and swift focus and movement of the optical unit in X, Y, Z directions. The shaft mounting diameter is φ14, and the lens barrel insertion diameter is φ32.

slider

slider

30 mm sliding

Provided as standard with MS, MFS, ZLS series, and KZS and MWS-1 (B), VS and VZS-45. The distance from the center of the φ14 shaft mounting hole to the optical axis is 90 mm.

Cross hole slider

Cross hole slider

30 mm sliding

There is also a shaft mounting hole on the rear side, which means that the shaft can be inserted in any of the cross hole directions and secured by tightening with the lever. The distance from the center of the φ14 shaft mounting hole to the optical axis is 90 mm.

TR slider

TR slider

30 mm sliding

This is a long slider that is suitable when the depth of slide needs to be longer. The distance from the center of the φ14 shaft mounting hole to the optical axis is 90 mm.

PA slider

PA slider

20 mm sliding

This is a compact and lightweight slider that is ideal for mounting onto machinery or devices. The φ14 shaft mounting hole opens in both vertical and horizontal orientations, so that by inserting the shaft horizontally, the microscope can be set at an angle.
The distance from the center of theφ14 shaft mounting hole to the optical axis is 70 mm.

PZ-MS

PZ-MS

【32mm sliding action】

This is Sliding holder for Measure scope mounting Φ16 stand and Φ16 shaft. The distance from the center of the shaft mounting hole to the optical axis is 110mm.

FA slider

FA slider

20 mm sliding

It has an articulated construction that allows 180° tilting and 360° rotation, so that the lens barrel can be freely set at whichever angle is required by the operating conditions. The FA-S stand, combined with a magnet, is very popular. It is ideal for mounting onto machinery or devices, and there is also a version for mounting onto bonding machines.

MY slider

MY slider

20 mm sliding

Compact and lightweight sliding holder with φ14 shaft, available with short (60 mm) and long (248.5 mm) shafts.
The MY-S stand, combined with a magnet, is very popular.

MX slider

MX slider

X axis 20 mm, Y axis 30 mm, Z axis 60 mm sliding

The MX slider is a triple axis sliding holder with φ14 shaft, and is widely used where longitudinal, horizontal and vertical movement is required.
The MX-S stand, combined with a magnet, is very popular.

AX-A slider / AX slider

AX slider
【AX-A slider】

【AX slider】

AX-A slider:60mm Sliding
AX slider:30 mm sliding

This slider allows the lens optical system to be inserted horizontally, and is capable of vertical movement.
It is ideal for mounting onto machinery or devices where space is limited.
AX-A slider is 60mm sliding.
AX slider is 30mm sliding.
*AX slider does not have stopper and scale.

MZ-A stand

MZ stand

X axis 70 mm, Y axis 60 mm, Z axis 60 mm sliding action

This is a stand-alone type three axis slider holder. Utilizing its dovetail guide characteristics, it can perform smooth sliding action even with long strokes, and is ideal for mounting on machinery or devices.

・Scale is attached to each of the X, Y and Z axis. (The scale of Z axis is attached to the Z surface.)
・Stopper is attached to each of the X, Y and Z axis. (Two stoppers are attached to the X axis.)

Magnet type MZ-A stand

Magnet type MZ stand

X axis 70 mm, Y axis 60 mm, Z axis 60 mm sliding action

The MZ stand is fitted with a magnet, making it easy to mount onto machinery, and easy to attach, remove and operate in the workplace.