Eyepiece lenses (Short name : OCD)

Measure scope eyepiece lenses can all be fitted with φ 24
micrometer glass. The diopter correction function allows the scale marks to be focused to match the operator’s vision. Also, an optional eyepiece hood is available to cut ambient light and improve visibility and reduce eye fatigue.

OC.WFD 10x

OC.WFD 10x

  • PDFdata
  • DXFdata
OC.WFD 15x

OC.WFD 15x

  • PDFdata
  • DXFdata
OC.WFD 20x

OC.WFD 20x

  • PDFdata
  • DXFdata
Eyepiece hood OC-EH

Eyepiece hood OC-EH

  • PDFdata
  • DXFdata

OSM-MF

How to use the traveling micrometer lens : OSM-MF

The traveling micrometer lens magnification has 10x magnification, with a scale comprising eight 8 mm divisions and a movable indicator line. The movable indicator line has X shaped crosshairs formed of two vertical lines, and can be moved to the right or left by rotating the handle on the right.
One turn of the handle moves the crosshairs 1 mm, or 100 scales (1 mm is 100 increments). This scale can be used to read the degree of movement. Connection is possible with MF and MFS series only, and the unit is ideal for detailed measurement.

  • PDFdata
  • DXFdata

Relay Lens C-Mount Adapter RL-CA

Relay Lens C-Mount Adapter RL-CA
Simple application in image observation

The C-Mount Adapter can be mounted directly over the eyepiece lens of the microscope, allowing the eyepiece micrometer to be shown on the monitor. Though there are some limitations on field of vision, scale marks can be displayed to allow measurement and positioning on the screen. Select after referring to the image data guide table.

* Because the image is magnified electronically, by CCD camera, etc., the field of vision displayed on the monitor becomes narrower in comparison with observation through a microscope with the naked eye. Also, the range of the scale marks displayed on the monitor is limited, as illustrated.
(In the case of a 2/3 inch CCD, vertical 43 increments, horizontal 58 increments)

  • PDFdata
  • DXFdata

Direct Lens C-Mount Adapter D-CA Simple application in image observation

Direct Lens C-Mount Adapter  D-CA Simple application in image observation

The Direct C-Mount Adapter can be mounted directly onto the lens, after removing the eyepiece. Its low cost means that it can be used for simple inspections where the work-piece only needs to be displayed on a monitor. Select after referring to the image data guide table.

* Because the image is magnified electronically, by CCD camera, etc., the field of vision displayed on the monitor becomes narrower in comparison with observation through a microscope with the naked eye.

  • PDFdata
  • DXFdata

C-Mount Adapter Image Data Guide Table

Relay Lens C-Mount Adapter data guide table

Eyepiece lens Objective lens Field of vision
(vertical x horizontal x diagonal) mm
Monitor magnification
(on 9 inch monitor)
Working distance mm
OCD 10x OBD 1 x 4.5 x 6 x 7 Approx. 29.6 x Approx. 176mm
2 x 2.25 x 3 x 3.5 Approx. 58 x Approx. 85mm
3 x 1.5 x 1.95 x 2.3 Approx. 86 x Approx. 63mm
4 x 1.1 x 1.5 x 1.75 Approx. 118 x Approx. 48mm
5 x 0.9 x 1.2 x 1.4 Approx. 147 x Approx. 39mm
6 x 0.75 x 0.95 x 1.2 Approx. 172 x Approx. 33mm
8 x 0.55 x 0.72 x 0.9 Approx. 232 x Approx. 27mm
10 x 0.45 x 0.6 x 0.7 Approx. 296 x Approx. 20mm
Eyepiece lens Objective lens Field of vision
(vertical x horizontal x diagonal) mm
Monitor magnification
(on 9 inch monitor)
Working distance mm
OCD 20x OBD 1 x 2.25 x 3 x 3.5 Approx. 58 x Approx. 176mm
2 x 1.125 x 1.5 x 1.75 Approx. 116 x Approx. 85mm
3 x 0.75 x 0.975 x 1.15 Approx. 172 x Approx. 63mm
4 x 0.55 x 0.75 x 0.875 Approx. 236 x Approx. 48mm
5 x 0.45 x 0.6 x 0.7 Approx. 294 x Approx. 39mm
6 x 0.375 x 0.475 x 0.6 Approx. 344 x Approx. 33mm
8 x 0.275 x 0.36 x 0.45 Approx. 464 x Approx. 27mm
10 x 0.225 x 0.3 x 0.35 Approx. 592 x Approx. 20mm

* Actual data from use with M-45 Optical lens system, with 2.3 inch CCD camera.
* If the size of the TV monitor is increased, the monitor magnification will be increased by that amount.
  (The field of vision will not change.)

Direct C-Mount Adapter data guide table

■When 2/3" CCD camera is used

Objective lens Field of vision
(vertical x horizontal x diagonal) mm
Monitor magnification
(on 9 inch monitor)
Working distance mm
OBD 1 x 4.2 x 5.3 x 6.3 Approx. 32 x Approx. 150mm
2 x 2.28 x 2.9 x 3.5 Approx. 60 x Approx. 80mm
3 x 1.6 x 2 x 2.4 Approx. 85 x Approx. 61mm
4 x 1.2 x 1.55 x 1.9 Approx. 112 x Approx. 48mm
5 x 1 x 1.25 x 1.5 Approx. 136 x Approx. 39mm
6 x 0.82 x 1.05 x 1.3 Approx. 162 x Approx. 33mm
8 x 0.62 x 0.8 x 0.95 Approx. 216 x Approx. 24mm
10 x 0.5 x 0.65 x 0.8 Approx. 264 x Approx. 20mm

■When 1/2" CCD camera is used

Objective lens Field of vision
(vertical x horizontal x diagonal) mm
Monitor magnification
(on 9 inch monitor)
Working distance mm
OBD 1 x 3.1 x 4.1 x 4.9 Approx. 42 x Approx. 150mm
2 x 1.7 x 2.2 x 2.6 Approx. 78 x Approx. 80mm
3 x 1.2 x 1.55 x 1.85 Approx. 110 x Approx. 61mm
4 x 0.9 x 1.18 x 1.4 Approx. 147 x Approx. 48mm
5 x 0.75 x 0.95 x 1.15 Approx. 180 x Approx. 39mm
6 x 0.61 x 0.81 x 0.98 Approx. 214 x Approx. 33mm
8 x 0.48 x 0.6 x 0.73 Approx. 286 x Approx. 24mm
10 x 0.4 x 0.5 x 0.6 Approx. 350 x Approx. 20mm

* Actual data from use with M-45 Optical lens system.
* If the size of the TV monitor is increased, the monitor magnification will be increased by that amount.
  (The field of vision will not change.)